Special Machinery for Glass Moulds

RS7

RS7 Joint Grinding Machine

HOW DOES THE RS7 OPERATE ?

The RS7 is a flat- and hollow grinder for grinding mould joints after repair.

The machine is manual in order to allow taking away material only where necessary.

The mould is positioned on a magnetic holder with V-blocks.
The mould can be adjusted in 2 directions to make sure that the joint is perfectly parallel with the table of the machine: the mould can be axially adjusted in the V-blocks with a gauge and mould & holder together can be longitudinally adjusted with a comparator.

The hollow grinding is obtained with a copying device and a template at a scale of 10:1 for depth and 1:1 for length.
The profile of the template is +/- 1 mm deep and can be made easily and accurately enough with a file.

ADVANTAGES OF THE RS7

RS7

MAIN CHARACTERISTICS OF THE RS7

SONICAM - P.O. BOX 15 - 2/4, rue Gustave Eiffel - Z.I. Le Pontet - 69360 SAINT-SYMPHORIEN-D'OZON (FRANCE)
Tél +33/478 024 950 - Fax +33/478 024 951 - Email :